7
4. Secure the middle frame to the lower frame using 2 knobs
and 2 carriage bolts. Install the knobs on the outside of
the unit, and tighten (Fig. 4).
5. Align the holes in the bottom of the lower frame with those
on the unit (Fig. 5).
6. Secure the lower frame to the unit using 2 knobs and 2
J-bolts. Install the knobs on the inside of the unit, and
tighten (Fig. 6).
Chute Crank Assembly
1. Remove the cotter pin from the lower crank rod (Fig. 7).
2. Insert the pin-hole end of the lower crank rod into the
opening at the back of the housing with holes aligned
(Figs. 8 – 10).
Fig. 4
Fig. 5
Handle knob
Square
J-bolt
Fig. 6
Fig. 7
Cotter pin
Fig. 8
Lower crank rod
Housing
opening
Fig. 9
Summary of Contents for SJ617E
Page 18: ...18 NOTES...
