background image

4

Safety Symbols

The following table describes safety symbols that may appear on this product. Read, understand, and follow all instructions on 

the machine before attempting to assemble and operate.

Double insulation.

Always keep the power cable away 

from heat sources, oils, or sharp 

edges. Immediately remove plug from 

the mains if the cable is damaged or 

entangled.

The rotating part will continuously 

run for several seconds after you 

turn off the machine.

READ THE OPERATOR'S 

MANUAL(S) – Read, understand, 

and follow all instructions in the 

user manual(s) before attempting 

to assemble and operate.

SAFETY ALERT – Indicates a 

precaution, a warning, or a danger.

Wear hearing protection. 

Wear eye protection. 

Wear breathing protection.

WARNING! Do not expose the 

unit to rain or wet conditions. 

Keep dry.

CAUTION! Beware of stones and 

other foreign objects that could 

be thrown from the appliance.

DANGER! Cutting/dismemberment 

hazard – Keep hands away from the 

rotating auger. Do not use hands to 

unclog rotor housing. Stop motor 

before removing debris.

DANGER! Cutting/dismemberment 

hazard – Keep feet away from the 

rotating auger.

Symbols

Symbols

Descriptions

Descriptions

 

Do not use hands to unclog chute.

Keep hands, feet, and clothing 

away from the rotating auger to 

avoid injury. 

Keep bystanders and children a 

safe distance (at least 33 ft/10 m) 

away from the work area.

WARNING! Turn the machine OFF 

and disconnect it from the power 

supply before inspecting, cleaning, 

changing accessories, or conducting 

any other maintenance task.

Wear protective gloves and non-slip 

footwear when using the machine 

and handling debris.

Summary of Contents for SJ617E





















Reviews: