Lit. No. 78520/78521/78522, Rev. 01
9
April 1, 2019
INSTALLATION INSTRUCTIONS
BLADE DROP SPEED ADJUSTMENT
The quill in the valve manifold adjusts the blade drop
speed.
1. Lower the blade to the ground before making any
adjustment.
2. Remove the hydraulic unit cover.
3. Turn the quill IN (clockwise) to decrease drop
speed. Turn the quill OUT (counterclockwise) to
increase drop speed.
4. Stand 8 feet clear of the blade when checking
adjustment.
5. Replace the cover.
WARNING
Keep 8' clear of the blade when it is being
raised, lowered, or angled. Do not stand
between vehicle and blade or directly in front
of the blade. If the blade hits or drops on you,
you could be seriously injured.
FINAL INSPECTION AND ADJUSTMENT
1. Fully angle the blade in both directions in raised
and lowered positions. Adjust hose
fi
ttings, wraps,
and clamps so that the hoses do not contact
vehicle bumper, have no sharp bends and are
wrapped at contact points, and do not become
pinched between the headgear and the T-frame.
2. Add grease to the two hitch pins.
WARNING
Keep 8' clear of the blade when it is being
raised, lowered, or angled. Do not stand
between vehicle and blade or directly in front
of the blade. If the blade hits or drops on you,
you could be seriously injured.
Quill
Use a good quality
multipurpose grease.
Summary of Contents for UTV V-Plow Series
Page 2: ......
