background image

Lit. No. 78520/78521/78522, Rev. 01 

April 1, 2019

SAFETY

FIRE AND EXPLOSION

Be careful when using gasoline. Do not use gasoline 
to clean parts. Store only in approved containers away 
from sources of heat or 

fl

 ame.

CELL PHONES

A driver's 

fi

 rst responsibility is the safe operation of 

the vehicle. The most important thing you can do 
to prevent a crash is to avoid distractions and pay 
attention to the road. Wait until it is safe to operate 
Mobile Communication Equipment such as cell 
phones, text messaging devices, pagers, or two-way 
radios.

VENTILATION

BATTERY SAFETY

NOISE

Airborne noise emission during use is 95 dB(A) for the 
snowplow operator.

VIBRATION

Operating snowplow vibration does not exceed 
2.5 m/s

2

 to the hand-arm or 0.5 m/s

2

 to the whole 

body.

TORQUE CHART

1/4-20

109

154

1/4-28

121

171

5/16-18

150

212

5/16-24

170

240

3/8-16

269

376

3/8-24

297

420

7/16-14

429

606

7/16-20

9/16-12
9/16-18

5/8-11
5/8-18
3/4-10
3/4-16

7/8-9

7/8-14

474

669

644

909

1-8

1-12

704

995

1/2-13

1/2-20

11.9
13.7

24.6

27.3

43.6

26.9
53.3

93

148

49.4
69.8

77.9

106.4
120.0

8.4
9.7

17.4

19.2
30.8
35.0
49.4
55.2
75.3
85.0

M6 x 1.00

M12 x 1.75

M8 x 1.25

M14 x 2.00

M10 x 1.50

M27 x 3.00

M22 x 2.50

M30 x 3.50

M24 x 3.00

M20 x 2.50

11.1

19.5
38.5

67

107

7.7

613

778

1139

1545

450

428
562
796

1117

M33 x 3.50
M36 x 4.00

2101
2701

1468
1952

325

M16 x 2.00

231

167

M18 x 2.50

318

222

Recommended Fastener Torque Chart

Size

Size

Torque (ft-lb)

Grade

5

Grade

8

Metric Fasteners Class 8.8 and 10.9

These torque values apply to fasteners

except those noted in the instructions.

Torque (ft-lb)

Grade

5

Grade

8

Size

Size

Torque (ft-lb)

Class

8.8

Class

10.9

Torque (ft-lb)

Class

8.8

Class

10.9

Inch Fasteners Grade 5 and Grade 8

 CAUTION

Batteries normally produce explosive gases, 
which can cause personal injury. Therefore, 
do not allow 

fl

 ames, sparks, or lit tobacco 

to come near the battery. When charging or 
working near a battery, always cover your 
face and protect your eyes, and also provide 
ventilation.
•  Batteries contain sulfuric acid, which burns 

skin, eyes, and clothing.

•  Disconnect the battery before removing or 

replacing any electrical components.

 CAUTION

Read instructions before assembling. 
Fasteners should be 

fi

 nger tight until 

instructed to tighten according to torque 
chart. Use standard methods and practices 
when attaching snowplow, including proper 
personal protective safety equipment.

 WARNING

Vehicle exhaust contains lethal fumes. 
Breathing these fumes, even in low 
concentrations, can cause death. Never 
operate a vehicle in an enclosed area without 
venting exhaust to the outside.

 WARNING

Gasoline is highly 

fl

 ammable and gasoline 

vapor is explosive. Never smoke while 
working on vehicle. Keep all open 

fl

 ames 

away from gasoline tank and lines. Wipe up 
any spilled gasoline immediately.

Summary of Contents for UTV V-Plow Series













Reviews: