Lit. No. 74912, Rev. 00
7
May 1, 2020
INSTALLATION INSTRUCTIONS
Stacking Stop
4. If the T-frame was installed into hole 1, install the
stacking stops using the 3/8" x 1-1/4" cap screws
and 3/8" locknuts from the parts bag.
NOTE: Failure to install stacking stops when
required will result in blade, lift arm, or headgear
damage.
5. If the T-frame was installed into hole 2 or hole
3, do not install the stacking stops. Retain the
stacking stops in case the snowplow is installed
on a different vehicle.
