Lit. No. 74912, Rev. 00
5
May 1, 2020
INSTALLATION INSTRUCTIONS
UNPACKING AND REMOVING SHIPPING
BRACKETS
1. Set aside the blade guides and parts bags. The
vehicle electrical harnesses are in the headlamp
box. Move the attach/detach lever to unpin the
receivers and set aside.
NOTE: Leave handle in the "detach" position
during entire assembly process.
2. Remove the lag screws and wood blocks securing
the headlamp channel to the headgear and set the
headlamp channel aside.
3. Remove the fasteners and stacking stops from the
pallet. Retain the stacking stops and discard the
fasteners.
4. Remove the packaging hardware that secures the
headgear to the T-frame, except for the clevis pins
and the shipping brackets.
5. Remove the fasteners and blocking that secures
the T-frame to the pallet.
Remove and discard
self-tapping screws and
shipping brackets
(both sides).
Remove and retain
3/4" x 3-1/4" clevis pins
(both sides).
Attach/Detach
Lever
6. While supporting the headgear, remove and
discard the self-tapping screws.
7. Remove and retain the 3/4" x 3-1/4" clevis pins.
Discard the shipping brackets and hairpin cotters.
8. Remove and discard the two 5/8" cap screws
and 5/8" locknuts from the shipping bracket and
the lift cylinder. Remove and discard the shipping
bracket.
Remove and discard
shipping bracket.
Remove and discard
5/8" cap screws and locknuts.
Stacking Stops
