1
TPH 175
Remove vehicles existing ball hitch from the mounting bracket
Place TPH bracket onto the vehicle mounting bracket and place the ball hitch over the bolts and fasten
Self locking nuts (ensure that the bolts are long enough they should be at least 2 threads slowing
through the nuts when tight).
The Snowex spreader can now be mounted onto the TH-
175 by inserting the 2” receiver tube of the
spreader, the 2” female receiver tube of the TH
-175 one located a locking pin (supplied with the spreader)
can be inserted into the holes on the side of the hitch. To ensure all free play is removed tighten the pinch
bolt on the hitch(19mm spanner or socket required)
Summary of Contents for DSM 175
Page 7: ...7 FSM 175 ...
