![background image](http://html1.mh-extra.com/html/snorkel/sr1054/sr1054_operator-and-maintenance-manual_1309590094.webp)
94
Model: Snorkel SR9244 SR1054
Part Number: 159-0037-000
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
START UP
4.1
Start the engine by rotating the key selector (1) clockwise from position 0 (engine off)
to position 1. In this position, the display of the computer on board is activated and
the "Main" page is displayed. Activating the parking lights activates the back-lighting
of the buttons on the dashboards. Make sure the "Emergency button" is not
activated.
Wait for the spark plugs preheating LED goes off (preheating of the combustion air).
Pre-heating is only activated automatically when the control unit detects a low outdoor air
temperature.
Turn the key to the "Start" position to start the machine. After start-up, release the key and it will
automatically return to position 1.
The engine can only be started with the gear selection lever in the neutral "N" position and if
the operator is sitting in the driver's seat.
When starting up the engine do not insist for more than 5-7 seconds.
FORWARD DRIVE OR REVERSE DRIVE
4.2
The direction of travel of the machine can be selected either by the “stalk”
lever or joystick by enabling selection through the dedicated page in the
display menu.
To enable the forward drive of the machine (F) via stalk, pull the lever
towards the steering wheel and move it forward. The letter "F" will appear
on the display on the front right dashboard.
To enable the reverse drive of the machine (R), pull the lever towards the
steering wheel and move it back. The letter "R" will appear on the display on
the front right dashboard.
Enable the neutral gear (N) by moving the lever to the central position.
The lever controls do not operate when:
-
the parking brake is engaged
-
the operator is not sitting in the driver's seat.
Accelerator, brake, direction indicators, hazard lights, headlights and lights and in general all the function
controls required while driving on the road are described in the previous chapters and have
the same function and the same importance as the controls for common vehicles to circulate
on the roads.
Attention! If the operator leaves the driver's seat, the neutral gear "N" is automatically
engaged after 3 seconds.