![background image](http://html1.mh-extra.com/html/snorkel/sr1054/sr1054_operator-and-maintenance-manual_1309590127.webp)
127
Model: Snorkel SR9244 SR1054
Part Number: 159-0037-000
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
REPLACING THE ENGINE OIL FILTER/S
5.12.8
This operation must be carried out by qualified personnel.
Only proceed with the engine stopped and at a low temperature in order to avoid the risk of burns. Only
use filters with a filtration rating equivalent to that of the previous ones.
•
Place a container under the filter support to collect the spent oil.
•
Unscrew and remove the filter.
•
Thoroughly clean the surfaces of the support in contact with the sealing gasket.
•
Moisten the sealing gasket of the new filter with a layer of oil.
•
Tighten the new filter by hand on the support until it touches the gasket and then tighten it.
•
Dispose of the old filter according to the relevant regulations in force.