10.
Slew
: LEFT rotates the entire turntable and
boom to the left. RIGHT rotates the entire
turntable and boom to the right.
11
Lift Enable
: The platform can only be raised
when this light is lit. When this light is not lit
the platform will not raise because the
outriggers are not properly set.
Figure 7.4 - Upper Control Box Controls
12.
Foot Switch
: You must step down on the
foot switch, and hold it down when you use
any platform control that causes the platform
to move.
Figure 7.5 - Upper Controls - Foot Switch
■
Stabiliser Controls
Figure 7.6 - Stabiliser Controls (Manual)
1.
Boom / Stabiliser Switch:
Ensure the
boom/stabiliser switch on the lower control
box is set to stabiliser (see Item 6 on page 2
of this chapter)
NOTE:
Ensure that the front stabilisers are lowered first
to prevent damage to the jockey wheel.
2.
Valve Levers:
Operate the valve levers
to
activate the stabilisers and level the
machine.
3.
Bubble level:
Use the bubble level to level
the machine.
Figure 7.7 - Bubble Level
■
Self Levelling Stabilisers (Option)
Figure 7.8 - Self Levelling Stabiliser Controls
page 7 - 4
Rev F
MHP15/44HD – 12885A
7. Controls - Electric