Snom M100 KLE Administrator And Provisioning Manual Download Page 139

Page: 139 / 190

Configuration File Parameter Guide

139

Back to Contents

M100 KLE Administrator and Provisioning Manual

“system” Module: System settings

The System settings enables you to configure DECT related settings for the M100 KLE
4-Line base station.

General configuration file settings

MAC-specific configuration file settings

Setting:

system.repeater_mode_enable

Description:

Enables a repeater (such as the VSP605 Range Extender) to be
registered to the M100 KLE 4-Line base station.

Values:

0 (disabled), 1 (enabled)

Default:

Setting:

system.eco

Description:

Enables or disables ECO mode.

Values:

0 (disabled), 1 (enabled)

Default:

Setting:

system.x.registered_ipei

Description:

Read-only parameters indicating handset registration status (for both
auto & manual registration) (where x ranges from 1-10).



[blank] if no handset is registered to the slot



Summary of Contents for M100 KLE































































































































































































Search results

Summary of Contents for M100 KLE

Reviews:

Snom M100 KLE, Administrator And Provisioning Manual, Page: 139 / 190

Search results

Summary of Contents for M100 KLE

Reviews: