96
D335 User Manual
Customizing the Phone Settings
• Forwarding incoming calls when they are not answered:
1. Open the
Configuration Identity
page,
Features
tab.
2. In the
Call Forwarding
section, type the number of seconds into the text field of
Timeout
(sec)
. If an incoming call hasn't been answered when the time has elapsed, the call will be
forwarded to the phone number entered as target.
3.
Type the phone number in the "Target" text field of
Timeout
. Type each number the way it
needs to be dialed by the phone, without spaces or punctuation between the digits.
4. Click
Apply
and
Save
.
Turning call forwarding on
1. Open the
Configuration Identity
page,
Features
tab.
1. In the
Call Forwarding
section, click the radio button
On
for the forwarding event (
Always, Busy,
Timeout
) you want to enable.
2. Click
Apply
and
Save
.
Turning call forwarding off
1. Open the
Configuration Identity
page,
Features
tab.
2. In the
Call Forwarding
section, click the radio button
Off
for the forwarding event (
Always, Busy,
Timeout
) you want to disable.
3. Click
Apply
and
Save
.
C
all completion
On Snom phones call completion means that when a called number is busy or not available, your
phone will call you back as soon as the dialed number is not busy anymore or available again. The
factory default setting is "off".
Note
: This function must be supported by your VoIP provider and/or your PBX.
On the phone
1. Press
>
Call Features
>
Outgoing Calls
>
Call Completion
.
2. Select the setting and press
to change it from off to on and vice versa.
3. Press
briefly to return to the previous menu, press
for two seconds to return to the idle
screen.
On the web interface
1. Open the phone's web interface,
Advanced
Settings
page,
Behavior
tab.
2. In the
Phone Behavior
section, click the radio button
on
or
off
of the
Call completion
setting.
3. Click
Apply
and
Save
.
Summary of Contents for 00004390
Page 1: ...IP Phone D335 User Manual ...
Page 113: ...113 D335 User Manual Appendix 1 ...