manualshive.com logo in svg

Snom 00004390, User Manual, Page: 95 / 126

Share
Download
Snom 00004390 User Manual Download Page 95

95

D335 User Manual

 

Customizing the Phone Settings

C

all forwarding  

This feature automatically redirects all or certain incoming calls to another phone or a mailbox.  

Call forwarding is configured for each identity separately.  On the web interface, the settings are 
configured on the 

Configuration identity

 (1-12) pages.  If you set call forwarding on the phone, the 

settings are applied to the identity selected as the outgoing identity at the time of the configuration;  
the configuration must be repeated with the same or different settings for each identity.

Always  

All incoming calls are forwarded to the number of the phone, extension, or mailbox specified as this 

function's target.

When busy  

Calls ringing while the phone is busy are forwarded to the number of the phone, extension, or mailbox 

specified as this function's target.

After timeout

When a call starts ringing, the phone will wait for the number of seconds specified as "call forwarding 

time".  If the call has not been accepted by the end of this time period, it is forwarded to the number of 

the phone, extension, or mailbox specified as this function's target

Configuring the settings on the phone

See "Settings on the phone and turning on call forwarding" on page 67. 

Configuring the settings on the web interface 

If your internet telephony provider or your PBX uses codes to turn functions on and off, refer to their 
manuals for the codes to enter in "On Code"/"Off Code" text fields or ask your administrator.

Setting forwarding numbers

•  Forwarding all incoming calls:

1.  Open the 

Configuration Identity

 page, 

Features

 tab.

2.   In  the 

Call Forwarding

 section, type the phone number in the "Target" text field of

 Always

.   

Type each number the way it needs to be dialed by the phone, without spaces or punctuation 
between the digits.  

3.  Click 

Apply

 and 

Save

.

•  Forwarding incoming calls when the phone is busy:

1.  Open the 

Configuration Identity

 page, 

Features

 tab.

2.   In  the 

Call Forwarding

 section, type the phone number in the "Target" text field of 

Busy

.  

Type each number the way it needs to be dialed by the phone, without spaces or punctuation 
between the digits.  

3.  Click 

Apply

 and 

Save.

Summary of Contents for 00004390































































































































Reviews:

No comments