Snom 00004390 User Manual Download Page 57

Page: 57 / 126

D335 User Manual

Using the Phone

ctive calls

Hold

One call on hold

Press

to put the ongoing call on hold. Held calls are indicated threefold:

◦

By the text on the display.

◦

By the slowly blinking line key.

◦

By the slowly blinking call indication LED.

◦

By the double beep.

You can now:

◦

transfer the held call blindly or with prior announcement - see
"Transferring calls" on page 59.

◦

receive and make calls and put other calls on hold.

Pick up the held call by pressing its line key or by pressing

again. If the other party hangs up

while on hold, the call is terminated on your phone as well and the LED indicators are turned off.

Holding multiple calls

When you are in a call with one party and have one or more calls on hold and when there is more
than one call on hold, the symbol

is available in the function key line. You can switch back

and forth between the active call and any call on hold. Up to 12 simultaneous calls are possible, if
supported by the PBX.

• In Fig. 1–3 the phone is in one active call with a second call on hold. Fig. 1 and 2 both show the

connected call, in short label display mode (Fig. 1) and in full label display mode (Fig. 2). Press
the function key underneath

to show the call not currently on screen.

Fig. 1

Fig. 2

Fig.

Summary of Contents for 00004390































































































































Search results

Summary of Contents for 00004390

Reviews:

Related manuals for 00004390

Brands by name

Popular brands

Snom 00004390, User Manual

Search results

Summary of Contents for 00004390

Reviews:

Related manuals for 00004390

Brands by name

Popular brands