37
D335 User Manual
Getting to Know Your Phone
U
ser mode/administrator mode
Snom phones can be operated in administrator or user mode. In administrator mode, all settings are
accessible and can be modified; in user mode, a number of settings are not accessible. The factory
default is administrator mode.
When the phone is running in user mode, the administrator password is required to revert to
administrator mode. The default administrator password is 0000 (4 x zero). We recommend that you
change the password for security reasons.
Note: Do not forget to write the new password down and store it in a safe place; without
it, a TFTP reset to factory values is necessary to return the phone to administrator
mode.
If your phone is administered centrally, user mode may be the rule. Please check with
your administrator.
User mode on the phone
The "Network" menu and various other settings are inaccessible in user mode. See
"Settings" on page 28. Returning the phone to admin mode from user mode:
1. Press
.
2. Select, i.e, if necessary scroll to
Maintenance
and press .
3. Select
Security
and press .
4. Select
Administrator Mode
(Fig. 1), if necessary,
and press .
5. Enter the
Admin Mode Password
.
6. Press
to save and return to the
Security
menu where
Administrator Mode
has been changed
to "on" (Fig. 2).
Fig. 1
Fig. 2
7. Press for two seconds to return to the idle screen.
User mode on the web interface
Some windows like
Preferences
are available in user mode while many others, like the identities,
are not. The menu item
Advanced
is available in user mode but the settings normally found on the
Advanced Settings
page are not. In user mode the two pages look like this:
Summary of Contents for 00004390
Page 1: ...IP Phone D335 User Manual ...
Page 113: ...113 D335 User Manual Appendix 1 ...
