Snom 00004390 User Manual Download Page 121 | Manualshive

Page: 121 / 126

background image

121

D335 User Manual

Appendix 4

Transfer to

Transferring active calls and ringing incoming calls to the number set in the "Number"

text field. Pressing the key once will transfer the active or ringing call.

If the text field is empty, pressing the key will put the "Enter number" screen on the

display. Enter the number and press /

to complete the transfer.

For further information, see the article "Transferring calls" in the chapter "Using the
phone".

Voice Recorder

The phone does not record the voice streams at all; they must be recorded on the PBX
where a recording account must be set up. Pressing the key when the phone is idle will
establish a connection between the phone and the recording account, making it possible
to record spoken memos, meetings, or conferences. Pressing the key during a call
will establish a three-party conference with the two phones and the recording account
as participants. Please be advised that you must respect the legal restrictions of your
country for recording calls with or without the participants' knowledge and permission.

Xml Definition

Copy the XML sub tag of the action(s) you want the key to perform into the text field. The

currently available settings can be found here: http://wiki.snom.com/Features/Mass_
Deployment/Setting_Files/XML/XmlSubTags.

K

ey Events

ABS

Address book search (OCS accounts)

Accepted Calls

(Accepted List) List of calls accepted on the phone

Call Lists

Call history list (missed, received, dialed calls)

Change active ID

List of registered SIP identities

Conference

Starting a conference

Contacts

Contact List, where the Presence State of selected users can be seen (online, busy,

offline)

Directory

Internal phone directory

DND

Turning "Do not disturb" function (DND) on an off. When mapped to a function key with

an LED, the LED will light up when DND is turned on.

Favorites

Favorites list

Forward all

All incoming calls will be forwarded to another extension or an external phone number.
After turning call forwarding on with this key, the display will prompt you to enter - or

confirm/change a previously entered - forwarding number.

Help

FW versions lower than 8: Phone's IP address, MAC address, and firmware version.

FW 8 and higher: Phone's IP address and the URI to Snom Wiki. IP address, MAC

address, and firmware version can be found in Settings > 6 Information >

2 System Information.

Hold

Placing the active call on hold

«
...
119
120
121
122
123
...
»

Summary of Contents for 00004390































































































































Reviews:

No comments

Related manuals for 00004390

Brand: Yealink Pages: 87

Brand: Pantech Pages: 47

Brand: Audiovox Pages: 39

Brand: Audiovox Pages: 44

Comfort Pro P100

Brand: T-Comfort Pages: 148

Brand: Alcatel Pages: 2

Brand: OUKITEL Pages: 62

Brand: Hanlong Pages: 149

Brand: HME Pages: 2

Brand: HTC Pages: 204

SUNBURST SGH-A697 Series

Brand: Samsung Pages: 185

Brand: Samsung Pages: 132

Brand: AEG Pages: 50

Brand: AEG Pages: 33

Brand: AEG Pages: 40

Brand: AEG Pages: 137

Brand: AEG Pages: 109

Brand: AEG Pages: 126

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands