Snom 00004390 User Manual Download Page 102

Page: 102 / 126

102

D335 User Manual

Software Update

oftware update

anual update

The phone must be running in administrator mode.

1. Open a browser and enter the address

https://service.snom.com

2. Klick

Firmware

in the navigation bar at the top of the page.

3. Click

Firmware Update Center

in the drop-down list.

4. Click the release version you want to update to from the list for your type of phone (desk phone,

DECT, etc.).

5. On the [FW] RELEASE page, read the release notes.

6. Scroll down to the

Downloads

table.

7. Scroll down to your phone model in the left column of the table.

8. Right-click on the

download link

for SIP-r.bin file of the phone to be updated.

9. Click

Copy link location

Copy link address

(the exact wording depends on your browser).

10. Open the phone’s web interface and click

Advanced

in the menu on the left side of the display.

11. Click the

Update

tab.

12. In the

Manual Software Update

area, paste the link into the text field of

Firmware

13. Click

Load

. The phone begins to reboot.

14. If the phone asks “Reboot?”, press .

15. DO NOT DISCONNECT THE POWER WHILE THE PHONE IS REBOOTING

Summary of Contents for 00004390































































































































Search results

Summary of Contents for 00004390

Reviews:

Related manuals for 00004390

Brands by name

Popular brands

Snom 00004390, User Manual

Search results

Summary of Contents for 00004390

Reviews:

Related manuals for 00004390

Brands by name

Popular brands