Snom 00004257 Page 20 User Manual Download

Page: 20 / 98

D315 | D305 User Manual

Getting to Know Your Phone

ED indicators

Call indicator

The bright-red LED situated at the top of the display indicates incoming, ongoing, held, and missed
calls. It will be:

• Blinking rapidly when a call is coming in

• Glowing steadily when dialing, when in a call, and when you have missed a call. To turn the LED

off after a missed call, press the left arrow on the navigation key to open the

Missed calls

and simultaneously turn off the LED.

• Blinking slowly when you have put a call on hold

Function key LEDs

Depending on the function mapped onto the key, the LEDs of the key will be activated when the key
event occurs. The factory default settings are printed on the paper insert; see "At a glance" on page
18.

• Line (L1 and L2):

◦

Fast-blinking LED: Incoming call. Press the blinking line key or

to accept

◦

Steadily lit LED: In call

◦

Slow-blinking LED: Call on hold

◦

LED off: Line is free

• Directory: Steadily lit LED when searching in or editing the directory

• Transfer: The LED is off.

• Mute: Steadily lit LED when the microphone is muted.

• When other functions are mapped onto the keys, the LEDs may glow or blink. For example: When

the "extension" function has been mapped onto a key to monitor an extension, the LED will

◦

blink rapidly when a call is ringing on the extension;

◦

glow steadily when the extension is busy;

◦

be off when the extension is not busy.

LED on MWI key

The LED glows red when there is a new message on the mailbox.

Summary of Contents for 00004257



































































































Search results

Summary of Contents for 00004257

Reviews:

Related manuals for 00004257

Brands by name

Popular brands

Snom 00004257, User Manual

Search results

Summary of Contents for 00004257

Reviews:

Related manuals for 00004257

Brands by name

Popular brands