Snell VEGA-16MV User Manual Download Page 38

Page: 38 / 260

Vega-MV Router Multiviewer - User Manual

Issue 1 Revision 2

Page 38

MV-NET Card and Rear Module - Slot 0

Vega-MV Unit Hardware 4.5

4.5.2 MV-NET Rear Panel Module (Part MV-NRP1) - Rear Slot 0 only

The rear panel provides connections for the video reference input, timecode Input, global
GPI/O and serial port connections.

4.5.3 GPI Input/Output Connectors

The GPI/O 15 way high density D-Type socket is located on the MV-NET rear panel and
provides global GPI/O connections for the Vega-MV frame.

The global GPI/Os are configured from the

Setup Module

option from the

Module

menu, see

sections 7.3.1.6 and 7.3.1.7 for details.

Table 10 gives the pin assignments for the GPI Input/Output:

Figure 19 MV-CTL Rear Panel Connections - Slot 0 Only

Note:

Vega-MV LAN Port:

The Vega-MV web interface is accessed via the

MV-CTL

card rear panel LAN port, see

section 4.6.
The

MV-NET

rear panel LAN port is for NTP connection and also firmware upgrade to the

MV-NET card.

Note:

LTC:

The LTC input is an unbalanced input.
To use a balanced LTC input, the signal must be properly converted with a Balun in-line
transformer. Grounding either of the LTC input pins will not work.

Video Reference

Input BNC

LTC BNC

LAN Port

RJ45

(For NTP and MV-NET Card

Firmware Upgrades)

Global GPI/O - 15 Way High

Density D-Type socket

RS232/422 - 9 Way

D-Type socket

Figure 20 GPI Input/Output Connector.

Summary of Contents for VEGA-16MV





































































































































































































































































Search results

Summary of Contents for VEGA-16MV

Reviews:

Snell VEGA-16MV, User Manual, Page: 38 / 260

Search results

Summary of Contents for VEGA-16MV

Reviews: