Snell VEGA-16MV User Manual Download Page 119

Page: 119 / 260

Vega-MV Router Multiviewer - User Manual

Issue 1 Revision 2

Page 119

Object Menu

Web Interface 7.6

7.6 Object Menu

The settings for the tiles can be manipulated from the object menu. This is accessed either
by:

•

Selecting the object and using the

Object

menu.

•

Right-clicking on the object tile to be edited.

Figure 88 Object Menu.

Menu Option

Description

New Object

Creates a new object and opens the Edit Object Dialog.

Edit Object

Opens the Edit Object Dialog for the tile object that is currently
selected.

Cut Object

Deletes the currently selected tile object.

Copy Object

Copies the display properties of the currently selected tile object
(excludes source properties).

Paste Object

Pastes the copied display properties of the currently selected tile
object.

Paste New Object

Creates a new object and pastes any previously copied display
properties to it.

Move Object to Front

Moves the currently selected tile object in front of all other objects.

Move Object to Back

Moves the currently selected tile object behind all other objects.

Fit Object on to Grid

Expands all edges of the currently selected tile object to the
nearest grid.

Size Object to Grid

Sets the size of the currently selected tile object to the chosen grid
pitch.

Size Object to Screen

Sets the selected tile object to full-screen size.

Table 42

Object Menu

Summary of Contents for VEGA-16MV





































































































































































































































































Search results

Summary of Contents for VEGA-16MV

Reviews:

Snell VEGA-16MV, User Manual, Page: 119 / 260

Search results

Summary of Contents for VEGA-16MV

Reviews: