Vega 30 Router User Manual
Source Configuration Template
Vega 30 RollCall Templates 7.4
Issue1 Revision 1
Page 113
© 2017 SAM
7.4 Source Configuration Template
The Vega 30
Source Configuration
RollCall template is wide and shows only part of a large
sources table at any one time. The sources table lists pre-defined and user-defined sources.
The table has 500 rows for 500 possible sources. The user can navigate around pages of this
large table.
Each source table row shows information about each source name and the different columns
are:
•
Source name.
•
Name of up to one video source associated with the source name.
•
Names of up to 16 audio channel sources associated with the source name.
The following types of sources are listed in the table rows:
•
34 video input sources, each with 16 embedded audio channels.
These are pre-defined.
They are physical video inputs of the Vega 30 unit.
These are
not editable
.
•
Three MADI audio inputs (64 audio channel per input).
These are pre-defined.
They are physical MADI inputs of the Vega 30 unit.
These are
not editable
.
•
454 user-defined sources (initially blank).
These are user-definable.
Video and audio channel source associations can be made.
(Up to one video source, up to 16 audio channels.)
The
Source Configuration
template comprises 50 pages and each page shows 10 rows of
the source table. The screen is shown in overview in Figure 80 (four pages are shown) and is
shown in detail in Figure 83.
Figure 81 Sample Source Configuration Template Page
Note:
Editing Source Names:
Source Names
are not editable in the Source Configuration page.
Source Names
can be edited either:
•
in the Vega 30 Web page,
•
or in the RollCall template screens,
•
or in the RollCall XY Panel screens.
