MV-805 IP Multiviewer User Manual
Destination Spigot Template
RollCall Templates 6.7
Issue1 Revision 1
Page 71
© 2018 SAM
Video Format
Drop-down box.
Select the IP stream video data format to use at the destination spigot.
In ‘Auto’ mode, the destination spigot determines the video data format from data in the RTP
extended header of the IP stream.
Use ‘Auto’ when receiving IP streams from SAM IP devices.
Num Audio Chans
Drop down box.
Select the number of audio channels at the destination spigot.
In ‘Auto’ mode, the destination spigot determines the number of audio channels from data in
the RTP extended header of the received IP stream.
Use ‘Auto’ when receiving IP streams from SAM IP devices.
Extended Header
Item
Description
Table 20 Extended Headers Information (Destination Spigot Screen Item) (Continued)
New Multicast Flow
Setting
Description
Flow Information:
For each of the flows for the selected spigot, the following information is presented:
Multicast IP
Text box.
Enter the IP Address of the multicast stream.
Source IP
Text box.
Enter the IP Address of originating source of the multicast stream.
Port
Text box.
IP Port number to use for Input Flows on the multiviewer spigot.
Table 21 New Multicast Flow Settings (Destination Spigot Screen Item)
Item
Description
Take
Button.
Click
Take
to make a routing to a destination spigot (MV-805 input) or
apply a settings change.
Table 22
Take (Destination Spigot Screen Item)
