MV-805 IP Multiviewer User Manual
System-Setup Template
RollCall Templates 6.2
Issue1 Revision 1
Page 56
© 2018 SAM
6.2.5 IP Fabric box
The
IP Fabric
area of the
System - Setup
template assigns the physical media IP network
interfaces of the unit to the internal ‘IP multiviewer function’ of the MV-805 unit. These are
assigned as Fabric A or Fabric B.
Additionally, the R Domain ID for any R messages for IP routing is set up.
(This connects to the “IP Routing” side (IPRA) of a SAM IP Routing System Controller
(IP-RSC) unit, enabling destination spigot multicast IP settings to be changed from the
IP-RSC.)
Finally, the output video format for multiviewer display outputs is defined.
The number of network interfaces shown depends on the MV-805 model:
•
MV-805-16
- Two interfaces are shown,
Interface 1 Fabric A and Interface 1 Fabric B.
•
MV-805-32
- Four interfaces are shown,
Interface 1 Fabric A and Interface 1 Fabric B;
Interface 2 Fabric A and Interface 2 Fabric B.
Figure 33 IP Fabric Box
For ‘IP Routing’ R messages:
from the ‘IP Routing’ side of a SAM IP Routing System Controller unit
or
from a SAM IQTIC card.
