MC500
System Setup Menus
Issue 1 Rev 6
Page 30
© 2015 SAM
7.
System Setup Menus
This section details all of the screens, menu lists, options, and controls available for setting up
the unit from the front panel.
For information about using the various front panel controls, see “Front Panel Features” on
page 25. For information about navigating menus, see “Operation Using the Front Panel” on
page 27.
7.1 System
The System home screen shows status of the unit in use. You can access the System screen
at any time and from any menu by pressing the SYSTEM Shortcut button.
7.2 CVBS
The CVBS menu enables you to set up and view options for a video input source and the
video output signal. CVBS provides options for the two composite video input/output slots (if
the CVBS option is fitted).
Composite encoding and decoding options will have been chosen at the time of product
purchase. Y/C decoding is also available.
7.2.1 CVBS Decoder
Each slot has two composite video connections.
•
Source:
Use to select a video input source. If using a composite source, only one of
the two CVBS connectors are used.
•
Input 1:
Connection A1 contains the input composite signal.
•
Input 2:
Connection A2 contains the input composite signal.
•
Y/C:
When using Y/C signals both composite connectors are used, so this option
must be selected.
•
ACC:
The Automatic Chroma Control (ACC) examines the input burst amplitude and
adjusts chrominance gain to compensate for chroma level attenuation.
Note: Use this control when chroma levels are low compared to luminance. This may
occur when using YC installations or composite from RF links
.
Note:
The screens shown in this section are for guidance and reference only, and may be slightly
different to those on your unit.
