MC1000/MC1000-IQ/MC2000/MC2000-IQ
Channel Operation Menus
Issue 1 Rev 8
Page 47
© 2015 SAM
8.
Channel Operation Menus
This section details all of the menu lists, options, and controls available for performing signal
processing, frame rate, and format conversions from the front panel.
Each processing channel has its own set of system operation menus. The
MC2000/MC2000-IQ units have channels 1–2 available.
For information about using the front panel controls, see “Front Panel Features” on page 27.
For information about navigating menus, see “Operation Using the Front Panel” on page 29.
8.1 Home
The Home screen shows status of the unit in use. You can access the Home screen at any
time and from any menu by pressing the HOME button.
8.2 Input
The Input menu enables you to specify a video input source.
8.2.1 Input Select
Input Select lists the available input sources.
You can choose from the following, where applicable:
•
SDI 1–4
•
CVBS A–D - (MC1000/MC2000 only)
•
SFP A1, A2, B1, B2
8.2.2 Status
The Status list shows the current input status for any input. This is the same as the Input
Select list.
Note:
This section does not show every available menu screen. The screens shown are for
guidance and reference only, and may be slightly different to those on your unit.
Note:
The unit automatically detects the input standard.
