MC1000/MC1000-IQ/MC2000/MC2000-IQ
System Setup Menus
Issue 1 Rev 8
Page 32
© 2015 SAM
7.
System Setup Menus
This section details all of the screens, menu lists, options, and controls available for setting up
the unit from the front panel.
For information about using the front panel controls, see “Front Panel Features” on page 27.
For information about navigating menus, see “Operation Using the Front Panel” on page 29.
7.1 System
The System home screen shows status of the unit in use. You can access the System screen
at any time and from any menu by pressing the SYSTEM Shortcut button.
7.2 CVBS (MC1000/MC2000 Only)
The CVBS menu enables you to set up and view options for a video input source and the
video output signal. CVBS provides options for the four composite video input/output slots (if
the CVBS option is fitted).
Composite encoding and decoding options will have been chosen at the time of product
purchase. Y/C decoding is also available.
The composite capability is determined by the number of processing channels and certain
hardware restrictions. The composite variants allowed are as follows:
Note:
This section does not show every available menu screen. The screens shown are for
guidance and reference only, and may be slightly different to those on your unit.
Product
Composite
codes allowed
Description
Hardware fitted
MC1000
CT1
One channel composite
decode
CVBS A or B is a decoder
One channel composite
encode
CVBS C or D is an encoder
MC2000
CT 2
Two channels composite
decode
CVBS A & B are decoders
Two channels composite
encode
CVBS C & D are encoders
Note:
Note that routing of the composite signals through the various processing channels is
restricted by the product hardware. See “Block Diagrams” on page 15.
