LC2000/LC2000-IQ/LC4000/LC4000-IQ
RollCall Control Panel System Setup Screens
Issue 1 Rev 6
Page 98
© 2015 SAM
10.2 Audio Routing
The Audio Routing screen enables you to set up the routing for the AES and analog outputs.
10.2.1 AES Output 1–4
You can choose where to route the AES audio for each output.
10.2.2 Analog Output 1–2
You can choose where to route the analog audio for each output group.
Note:
The AES and analog audio menus are only available if the CVBS option is fitted.
Note:
Only pairs 1–4 from can be routed to the AES output. Pairs 5–8 are not available on the
AES output.
Note:
Only groups 1–2 can be routed to the analog output groups. Pairs 5–8 are not available on
the analog output groups.
