LC2000/LC2000-IQ/LC4000/LC4000-IQ
Channel Operation Menus
Issue 1 Rev 6
Page 70
© 2015 SAM
8.6.8 Input Signaling ARC Conversions
It is possible to manually fix the output aspect of the ARC when using input signaling. The
input to the ARC is then defined by the dynamic input signaling.
The following sections show the ARC conversions possible using input signaling and a
combination of SD Output Format and Conversion Scaling controls. For each of the
conversions there are four columns of images. The first column shows the source image in
various formats, with each format described in the accompanying input signal. The next three
columns show the output image format when the Fit to Width, 14:9, or Fit to Height
Conversion Scaling controls are selected.
8.6.8.1
SD Cross Conversion
SD Output Format = Normal (4:3).
