IQUDC30/IQUDC31/IQUDC32/IQUDC33
Operation Using the RollCall Control Panel
Issue 1 Rev 4
Page 91
© 2016 SAM
5.17 Memories
The Memories
screen enables you to save up to 16 memory setups and recall them when
required.
You can change the default memory names to more relevant ones if required.
5.17.1 Saving Memory Settings
•
In the Save Memory column, select a memory location and click Save. The current
settings are saved and the memory appears in the Recall Memory column.
5.17.2 Changing a Memory Name
•
In the Save Memory Name field, type the new memory name and click S to set. To
return the memory to its preset value, click P.
5.17.3 Recalling a Memory
The Recall Memory list recalls the settings saved in a memory location. The Last Recalled
Memory box shows the most recently recalled memory.
To recall a memory:
•
In the Recall Memory column, select the memory you want to recall. The recalled
settings are applied and the memory name appears under Last Recalled Memory.
5.17.4 Last Recalled Memory
The Last Recalled Memory box shows the most recently recalled memory.
Note:
You can store and recall all control in a user memory except for the following sections: Log
Enable, RollTrack, GPIO, Memories.
Note:
Memories do not recall log field states, such as whether a log value is enabled or disabled.
