IQUDC30/IQUDC31/IQUDC32/IQUDC33
Operation Using the RollCall Control Panel
Issue 1 Rev 4
Page 70
© 2016 SAM
5.8 Audio Shuffle-Ch1 and Ch2
The Audio Shuffle-Ch1 and Ch2 screens enables channel-based routing for PCM audio.
Non-PCM audio is restricted to pair-based routing as channels cannot be split. The matrix of
radio buttons enable you to route any available audio input pair to any process pair, providing
this routing adheres to certain rules. See “Channel-based Routing Rules” on page 71 for
more information.
5.8.1 Process Pairs
The Process Pairs column shows the eight process pairs selected on the Audio
Routing-Ch1/Ch2 screen. Each of the eight pairs is split into left and right channels to allow
channel-based routing. Each process pair channel corresponds to a row of radio buttons in
the shuffle matrix.
5.8.2 Output Pairs
16 output channels available from the shuffle matrix. These channels are grouped as pairs for
output processing, such as embedding. These channels are called the output pairs, each of
which corresponds to a column of radio buttons in the shuffle matrix.
•
To route a process channel to an output channel, simply select the radio button that
intersects the desired process channel row, with the desired output channel column.
Note:
The Audio Routing-Ch2 screen is only applicable to the IQUDC31 and IQUDC33.
