IQUDC30/IQUDC31/IQUDC32/IQUDC33
Operation Using the RollCall Control Panel
Issue 1 Rev 4
Page 66
© 2016 SAM
5.6.11 ARC Memories
ARC memories allow save and recall of ARC settings, without changing any of the other unit
settings. They are useful where specific ARC control needs to be rapidly changed, for
example response to signaling, without changing any of the unit input, output, enhancement
etc settings. There are 32 ARC memories.
5.6.11.1
To save a new ARC memory setting
•
Select the required memory from list of 32 available ARC memories to which you want
to save the current settings.
•
Click
Save
The memory will now appear in the “Recall Memory” list.
5.6.11.2
To recall an existing ARC memory
•
Select the required memory to recall from the list of saved memories.
The ARC memory settings are recalled.
5.6.11.3
To clear an existing ARC memory
•
Select the required memory from the list of saved memories.
•
Click
Clear
The ARC memory settings are now cleared.
5.6.11.4
To change the ARC memory default name
•
Select the required memory from the Save Memory list.
•
Delete the current name in the Save Memory Name box.
•
Enter the desired name in the Save Memory Name box.
•
Click the
S
button
The ARC memory name has now been changed.
Note:
Default memory names are ARC memory 1 to ARC memory 32.
