background image

29

The warranty on emissions-related parts is as follows:

• Any warranted part that is not scheduled for

replacement as required maintenance in the owner’s
manual supplied, is warranted for the warranty period
stated above. If any such part fails during the period of
warranty coverage, the part will be repaired or replaced
by Sears at no charge to the owner. Any such part
repaired or replaced under the warranty will be
warranted for the remaining warranty period.

• Any warranted part that is scheduled only for regular

inspection in the owner’s manual supplied, is warranted
for the warranty period stated above. Any such part
repaired or replaced under warranty will be warranted
for the remaining warranty period.

• Any warranted part that is scheduled for replacement as

required maintenance in the owner’s manual supplied, is
warranted for the period of time prior to the first
scheduled replacement point for that part. If the part fails
prior to the first scheduled replacement, the part will be
repaired or replaced by Sears at no charge to the owner.
Any such part repaired or replaced under warranty will be
warranted for the remainder of the period prior to the
first scheduled replacement point for the part.

• Add on or modified parts that are not exempted by the

Air Resources Board may not be used. The use of any
non exempted add on or modified parts by the owner
will be grounds for disallowing a warranty claim. The
manufacturer will not be liable to warrant failures of
warranted parts caused by the use of a non exempted
add on or modified part.

3. Consequential Coverage

Coverage shall extend to the failure of any engine
components caused by the failure of any warranted
emissions parts.

4. Claims and Coverage Exclusions

Warranty claims shall be filed according to the
provisions of the Sears engine warranty policy.
Warranty coverage does not apply to failures of
emissions parts that are not original equipment Sears
parts or to parts that fail due to abuse, neglect, or
improper maintenance as set forth in the Sears engine
warranty policy. Sears is not liable for warranty
coverage of failures of emissions parts caused by the
use of add-on or modified parts.

Look For Relevant Emissions Durability Period and Air
Index Information On Your Engine Emissions Label

Engines that are certified to meet the California Air Resources
Board (CARB) Emissions Standard must display information
regarding the Emissions Durability Period and the Air Index.
The engine manufacturer makes this information available to
the consumer on emissions labels. The engine emissions
label will indicate certification information.

The 

Emissions Durability Period

describes the number of

hours of actual running time for which the engine is certified
to be emissions compliant, assuming proper maintenance in
accordance with the Operating & Maintenance Instructions.
The following categories are used:

Moderate: 

Engine is certified to be emissions compliant for

125 hours of actual engine running time.

Intermediate:

Engine is certified to be emissions compliant

for 250 hours of actual engine running time.

Extended:

Engine is certified to be emissions compliant for

500 hours of actual engine running time.

For example, a typical walk-behind lawn mower is used 20 to
25 hours per year. Therefore, the 

Emissions Durability

Period

of an engine with an 

intermediate

rating would

equate to 10 to 12 years.

Small off-road engines are certified to meet the United States
Environmental Protection Agency (USEPA) Phase 2
emissions standards. For Phase 2 certified engines, the
Emissions Compliance Period referred to on the Emissions
Compliance label indicates the number of operating hours for
which the engine has been shown to meet Federal emissions
requirements.

For engines less than 225 cc displacement.
Category C = 125 hours
Category B = 250 hours
Category A = 500 hours

For engines of 225 cc or more displacement.
Category C = 250 hours
Category B = 500 hours
Category A = 1000 hours

Summary of Contents for 580.752640

























































Reviews: