SnapGear LITE, User Manual, Page: 11 / 95

Introduction
7
The SnapGear VPN Router
The following items will have been included with your SnapGear VPN Router:
•
Power adapter
•
Installation CD
•
Printed Quick Install guide
•
Cabling:
•
1 x normal UTP cable – blue
•
1 x “cross-over” UTP cable – (either gray or red ) With the LITE+ you will instead
receive two straight through cables ( blue ).
Figure 1.1 SnapGear SOHO+/PRO front panel LEDs
As shown above, the front panel contains ‘status’ LEDs. You will also find status LEDs on the rear
panel.
Label Activity Description
POWER / PWR On Power is supplied to the SnapGear VPN
Router.
Flashing System will flash once every second while the
SnapGear VPN Router is operating correctly. System / SYSTEM
On If System is on and not flashing, an
operating error has occurred. In this case the
other LEDs form a diagnostic pattern to
indicate what has failed. More information on
these patterns can be found in
Online / ONLINE On Indicates that a valid Internet connection is
present.