manualshive.com logo in svg

Snap-On Versus Edge, User Manual

Introducing the Snap-On Versus Edge - a powerful diagnostic tool designed to streamline automotive troubleshooting. Simplify your troubleshooting process with our comprehensive User Manual, available for free download on our website. Unlock the full potential of your product now - visit manualshive.com to access your manual and get started.

Share
Download
background image

61

Scan Module Operation

Troubleshooting

5.5.4  Recovery Procedure

This is a quick and easy method that reestablishes connectivity between the diagnostic tool and 
the Scan Module in most instances. If bluetooth connectivity remains unavailable following 
recovery, use one of the alternate procedures to restart the system.

NOTE:

i

This product is intended to be used by professional technicians in a garage environment. 
Electrostatic discharges may happen occasionally and cause a loss of communication. To restore 
communication disconnect and reconnect the communication cables and follow screen prompts.

z

To recover wireless connectivity:

1.

Disconnect the Scan Module from the vehicle.

2.

Navigate to the Home Screen on the diagnostic tool.

3.

Select 

Exit

 to close the ShopStream Diagnostic Suite.

4.

Connect the Scan Module to the vehicle.

5.

Select the 

ShopStream Diagnostic Suite

 icon on the desktop.

Figure 5-7 Sample ShopStream Diagnostic Suite desktop icon

NOTE:

i

The ShopStream Diagnostic Suite can also be started from the Windows Start menu.

Alternate Recovery Procedures

Use these methods as an option to the Recovery Procedure, or when recovery fails to restore the 
wireless connection.

USB Procedure

This method establishes a “hard-wired” USB cable connection between the modules.

z

To create a USB connection:

1.

Carefully slip the ends of the handgrip off of the sides of the Scan Module housing.

2.

Lift open the hinged cover on the base of the Scan Module.

Summary of Contents for Versus Edge










































































































































































































Reviews:

No comments

Related manuals for Versus Edge

Neoi NeoIDesc 601 Quick User Manual preview
NeoIDesc 601
Brand: Neoi Pages: 77
ClearClick VT32 Quick Start Manual And User Manual preview
VT32
Brand: ClearClick Pages: 18
AOC D70A15 User Manual preview
D70A15
Brand: AOC Pages: 18
Bamboo MTE-450 Quick Start Manual preview
MTE-450
Brand: Bamboo Pages: 18
Denver TAQ-90022 Faq preview
TAQ-90022
Brand: Denver Pages: 26
Alcatel 1T 7 Quick Start Manual preview
1T 7
Brand: Alcatel Pages: 10
U-Turn Iso-level Feet Setup Manual preview
Iso-level Feet
Brand: U-Turn Pages: 8
Thor’s Drone World LIFTHOR MJOLNIR EVO User Manual preview
LIFTHOR MJOLNIR EVO
Brand: Thor’s Drone World Pages: 20
Fujitsu Cider Q550 User Manual preview
Cider Q550
Brand: Fujitsu Pages: 33
Fujitsu Arrows Tab F-02F Instruction Manual preview
Arrows Tab F-02F
Brand: Fujitsu Pages: 199
Fujitsu ARROWS Tab FJT21 Settings Manual preview
ARROWS Tab FJT21
Brand: Fujitsu Pages: 2
Rand McNally RV TABLET 80 Quick Start Manual preview
RV TABLET 80
Brand: Rand McNally Pages: 24
Krüger & Matz EAGLE 804 Owner'S Manual preview
EAGLE 804
Brand: Krüger & Matz Pages: 24
iBridge IBR-ITAB User Manual preview
IBR-ITAB
Brand: iBridge Pages: 68
Evolve Droid 9.7 Quick Start Manual preview
Droid 9.7
Brand: Evolve Pages: 12
MobileDemand xTablet A1180 User Manual preview
xTablet A1180
Brand: MobileDemand Pages: 17
MobileDemand xTablet T7200 User Manual preview
xTablet T7200
Brand: MobileDemand Pages: 41
Supernote Supernote A6 X Quick Manual preview
Supernote A6 X
Brand: Supernote Pages: 17

Brands by name

Popular brands

Load more brands