manualshive.com logo in svg

Snap-On Versus Edge, User Manual

Introducing the Snap-On Versus Edge - a powerful diagnostic tool designed to streamline automotive troubleshooting. Simplify your troubleshooting process with our comprehensive User Manual, available for free download on our website. Unlock the full potential of your product now - visit manualshive.com to access your manual and get started.

Share
Download
background image

25

Chapter 4

Scanner Function

The Scanner function allows your Diagnostic Tool to communicate with the electronic control 
modules (ECMs ) of the vehicle being serviced. This allows you to perform tests, view diagnostic 
trouble codes (DTCs), and view live data parameters from various vehicle systems such as the 
engine, transmission, antilock brake system (ABS) and more.

4.1    Demonstration Program

A Scanner demonstration program is provided to help you to become familiar with Scanner 
operations, without connecting to a vehicle. Sample data and test results are provided to help you 
learn the menus and basic operations.

IMPORTANT:

Do not connect the Scan Module to a vehicle while using the Demonstration mode.

z

Using the demonstration program:

1.

From the Home screen, select the 

Scanner

 icon to open the manufacturer menu.

The manufacturer menu includes all makes for which Scanner information is available. There 
is also a Demonstration icon included in the list.

Figure 4-1 Sample demonstration selection

Summary of Contents for Versus Edge










































































































































































































Reviews:

No comments

Related manuals for Versus Edge

Samsung Galaxy Tab S2 Important Information Manual preview
Galaxy Tab S2
Brand: Samsung Pages: 56
Samsung GALAXY Note 8.0 Basics Of Using preview
GALAXY Note 8.0
Brand: Samsung Pages: 19
Samsung GT-P7320 Quick Start Manual preview
GT-P7320
Brand: Samsung Pages: 28
Ematic EWT106 User Manual preview
EWT106
Brand: Ematic Pages: 35
i.safe MOBILE IS930.RG Quick Start Manual preview
IS930.RG
Brand: i.safe MOBILE Pages: 76
Laser MID-1087 Quick Operation Manual preview
MID-1087
Brand: Laser Pages: 13
Laser MID-1085 Quick Operation Manual preview
MID-1085
Brand: Laser Pages: 13
Yamaha TT-N503 Quick Start Manual preview
TT-N503
Brand: Yamaha Pages: 2
Yamaha YP-D71 Service Manual preview
YP-D71
Brand: Yamaha Pages: 11
Yamaha YP-D71 Owner'S Manual preview
YP-D71
Brand: Yamaha Pages: 12
Yamaha P-850 Owner'S Manual preview
P-850
Brand: Yamaha Pages: 12
Yamaha PF-800 Owner'S Manual preview
PF-800
Brand: Yamaha Pages: 12
Yamaha P-520 Owner'S Manual preview
P-520
Brand: Yamaha Pages: 12
Yamaha P-07 Owner'S Manual preview
P-07
Brand: Yamaha Pages: 12
Yamaha YP-700 Owner'S Manual preview
YP-700
Brand: Yamaha Pages: 16
Yamaha YP211 Owner'S Manual preview
YP211
Brand: Yamaha Pages: 16
Yamaha P-450 Owner'S Manual preview
P-450
Brand: Yamaha Pages: 14
Yamaha TT-400URS Owner'S Manual preview
TT-400URS
Brand: Yamaha Pages: 16

Brands by name

Popular brands

Load more brands