Scanner - Motorcycle
Features and Icons
42
NOTE
Damage to electronic control modules may occur if communication is
disrupted. Make sure the data cable is properly connected at all times during
testing. Exit all tests before disconnecting the data cable or powering down the
diagnostic tool.
The Scanner function remains open as long as there is an active communication
link with the motorcycle. You must interrupt this communication link in order to exit
from tests and power down the diagnostic tool. A warning message displays if you
attempt to shut down while the diagnostic tool is communicating with the
motorcycle.
z
To exit the Scanner function:
1.
From any active Scanner screen, select the
Back
icon on the toolbar.
The “stopping communications” message briefly displays followed by the Data
menu.
2.
From the Data Menu, select
Back
on the toolbar.
The “stopping communications” message displays again, then the Main menu.
Once the Main menu is displayed, communication has been terminated and it
is safe to return to the Home screen and power down the diagnostic tool.
7.2 Features and Icons
7.2.1 Scanner Features
1— Title bar—
shows active test, vehicle and diagnostic tool status. The Title bar
appears for all functions and displays information only, there are no
selectable items. See
.
2— Toolbar
—contains control icons
3— Main body
—displays menus, code results, PIDs, etc.
Figure 7-1
Scanner screen features
1
2
3