Snap-On PRO-LINK EEHD974002, Activation Manual, Page: 14 / 56

- Entering Proxy Settings (If Required)
PRO-LINK
®
Ultra Registration and Software Activation Guide 11
Entering Proxy Settings (If Required)
If your local network is configured using a proxy server, you will need to enter in-
formation to tell PRO-LINK
®
Ultra how to communicate with it.
NOTE:
i
If your local network is not configured using a proxy server, you do not
need to enter these settings. Move on to either Entering Network Settings
for a Wireless Network , next in this guide, or Entering Network Setting for
Ethernet on page 21.
It may be preferable to have the designated IT person or network administrator for
your location perform this task for you.
To enter proxy settings:
1
Start from the Admin menu.
Figure 2.5
Admin Menu
2
Select Configure Device .