Quick Start
Page 9
Battery INStaLLatION
NOTE: Batteries are shipped with less than 20% charge for safety. They must be
charged prior to use. (See battery Charging Section)
Installing batteries: Grasp battery and press firmly into the pod until seated.
Removing batteries: Grasp battery, push in button on the battery and pull up.
*It is recommended to
remove the batteries and
charge them at the end of
each work day.
This ensures fresh
charged batteries for the
beginning of the next day.
pOWerING ON/OFF pODS
-Press and release the power button. The red LED will come on and the arrows will illuminate
red.
-Once powered up, the pods will connect wirelessly to each other and the arrows on the
switches shown below will light on/off in a circular motion.
-To power off the pods, press and hold the power button for 5 seconds.
