21
Chapter 5
Scanner Operations
The Scanner allows you to establish a data link to the electronic control systems of the vehicle
being serviced to retrieve diagnostic trouble codes (DTCs), view live data parameters, and
perform tests. The Scanner can access the electronic control module (ECM) for various vehicle
control systems such as engine, transmission, antilock brake system (ABS) and more.
Scanner testing requires connecting the Scan Module to the test vehicle using the data cable and
test adapters. On screen instructions tell you how to connect the Scan Module, additional
connection information can be found in the appropriate vehicle communication software manual
for the test vehicle, which is available through the Help menu.
5.1 Getting Started
Prior to first use of the Scan Module the unit must be paired with the Display Device to establish a
wireless communication link. Refer to
on page 115 for details.
A demonstration program allows you to become familiar with Scanner operations and testing
without being connected to an actual vehicle.
5.1.1 The Demonstration Program
The Scanner demonstration program allows you to become familiar with many of the test
capabilities without connecting to a vehicle. Sample data and mock test results help you learn the
menus and basic operations.
The Scan Module must be paired with the display device to use the demonstration program. See
on page 115 for details. Both the Scan Module and the display device
must be powered on.
z
To start the demonstration program:
1.
From the Home screen, tap the Scanner icon.
The manufacturer menu displays. This menu includes all makes that are covered by any of the
Diagnostic Platform modules, not just those for which Scanner information is available. There
is also a Demonstration button included in the list.
2.
Tap the Demonstration button.
