3
Setup and Operation
1. Attach the massager to a chair with elastic straps or place it on other support.
2. Connect the adapter cable to the corresponding cable on the cushion.
3. Plug the home adapter into an electric outlet.
4. Turn on the device using the controller ( instructions on page 5 ).
5. When finished place the controller in the pouch at the side of the cushion.
6. Detachable intensity control flap for back lets you choose a softer or more intense massage.
7. Detachable cover for neck lets you choose a softer or more intense massage.
• For your own safety we equip the massager with a protection against over-heating.
Heat is created in the motors when placed under great stress and excessive pressure. Before
this could create any risk and after a runtime of 15 Minutes. The massager will switch off
automatically and will only allow switching on again after an appropriate downtime.
• Likewise, you should allow your body some rest periods. To avoid straining your muscles too
much, we recommend to not exceed a continuous massage of 15 Minutes.
• Remove the adapter from the outlet when not in use.
• Do not setup or use the massager in a bathroom or similary wet / damp areas.
Removable
flap
Seat cushion
Blanket
/Towel
① Install the flap onto the cushion to get a softer massage.
①
②
③
② Place a blanket or towel between you and the massager to achieve a far
softer massage intensity if you still feel too strong shiatsu after installing
the flap onto the cushion.
③ If you want to massage your lower back, but the shiatsu nodes can not reach that low.
You may adjust the height of your back when sitting, by placing a seat cushion or
a pillow on the sitting part.
Note :
If the shiatsu can’t reach your lower back area
If the Shiatsu is too strong,
