SMT Volaro Series 4 Stand, Operator'S Manual

Page: 19 / 21

Volaro Stand Items To Inspect
1. Y - Beam Stand Lift
 Strap Retainer Springs
 Vinyl
2. Nuts and Bolts
 Check All Nuts and Bolts
3. Leg Adjuster Handle
 Condition (Check wear at pivot points.)
 Check All Attaching Hardware Tight
4. Leg Adjuster Notch Plate
 Wear (Legs kept securely in locked position?)
 Attaching Hardware
6. Leg Linkage
 Hardware Condition
7. Slings (Reasons to discard)
 Worn

Frayed/Loose Threads

Bleached Out
8. Actuator:

Noise - Up/Down (Replace bearings after 5
years)
 Grease (should be greased at least semi -
annually)
9. Power Box:
 Plastic Guides in Place
 Terminals
 Remote Jack
 Holder or Lens
10. Thumb Switches
 Left and Right
11. Knee Rest
 Safety Strap
 Vinyl
 Pivot
 Adjusting Pins/Knobs
12. Remote
 Switches
 Strain Relief
 Curly Cord
13. Casters
 Brakes
 Swivel

Roll

Bearings
14. Leg Bumpers

Cracked or Missing
15. Charger
 Operation
 Lights

Terminals (Bent or worn)
16. Power Pacs

Load Test

Age
17. Grips
18. Legs

Pivot

Attaching Hardware
 Alignment
19. Welds
 Visually Inspect for Cracks
20. Paint
21. Decals
 Correct
 Missing
22. Other: