SMSC USB464 Page 28 Datasheet Download | Manualshive

Page: 28 / 65

background image

High Speed Inter-Chip USB 2.0 Hub and Flash Media Controller

Datasheet

Revision 1.0 (06-01-09)

28

SMSC USB4640/USB4640i

DATASHEET

Chapter 8 Configuration Options

8.1

Hub

SMSC’s USB 2.0 hub is fully compliant to the Universal Serial Bus Specification available from the
USB Implementer’s Forum found at http://www.usb.org (Revision 2.0 April 27, 2000 and the 12/7/2000
and 5/28/2002 Errata). Please reference Chapter 11 (Hub Specification) for general details regarding
hub operation and functionality.

For performance reasons, the hub provides 1 transaction translator (TT) that is shared by both
downstream ports defined as a single-TT configuration. The TT contains 4 non-periodic buffers.

8.1.1

Hub Configuration Options

The SMSC hub supports a large number of features (some are mutually exclusive), and must be
configured in order to correctly function when attached to a USB host controller. There are two principal
ways to configure the hub:

via the internal default settings or

by settings stored in an external EEPROM or SPI Flash device.

8.1.1.1

Power Switching Polarity

The hub will only support active high power controllers.

8.2

Card Reader

The SMSC USB4640/USB4640i is fully compliant with the following flash media card reader
specifications:

Secure Digital 2.0 / MultiMediaCard 4.2

-SD 2.0, HS-SD, HC-SD
-TransFlash™ and reduced form factor media
-1/4/8 bit MMC 4.2

Memory Stick 1.43

Memory Stick Pro Format 1.02

Memory Stick Pro-HG Duo Format 1.01

-Memory Stick, MS Duo, HS-MS, MS Pro-HG, MS Pro

Memory Stick Duo 1.10

xD-Picture Card 1.2

8.3

System Configurations

8.3.1

EEPROM/SPI Interface

The USB4640/USB4640i can be configured via a 2-wire (I

2

C) EEPROM (512x8) or an external SPI

flash device containing the firmware for the USB4640/USB4640i. If an external configuration device
does not exist the internal default values will be used. If one of the external devices is used for
configuration, the OEM can update the values through the USB interface. The hub will then “attach”
to the upstream USB host.

«
...
26
27
28
29
30
...
»

Summary of Contents for USB464


































































Reviews:

No comments

Related manuals for USB464

Brand: Panasonic Pages: 68

Brand: Panasonic Pages: 27

Brand: Panasonic Pages: 168

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 3

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 29

Brand: Panasonic Pages: 37

Brand: Panasonic Pages: 9

Brand: Samsung Pages: 27

Brand: Abicor Binzel Pages: 8

Brand: Baby Trend Pages: 8

Brand: Baby Trend Pages: 19

Brand: Baby Trend Pages: 5

Brand: Baby Trend Pages: 4

Brand: Garmin Pages: 4

Brand: Maestra Pages: 22

Brand: Lakeshore Pages: 186

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands