background image

  

 

Tabletop Gas Grill  

   VT280SS1

 

Tools needed for assembly:  

Phillips screwdriver, Pliers or Adjust-
able  Wrench

 

If you smell gas: 
1.  Shut off gas to the appliance. 
2.  Extinguish any open flames. 
3. Open 

lid. 

4.  If odor continues, keep away from 

the appliance and immediately call 
your fire department. 

 

Failure to follow these instructions could 
result in fire or explosion which could 
cause property damage, personal injury 
or death. 

DANGER

 

1.  Never operate this appliance unat-

tended. 

2.  Never operate this appliance within 

10 ft (3.0 m) of any structure, com-
bustible material or other gas cylin-
der. 

3.  Never operate this appliance within 

25 ft (7.5 m) of any flammable liquid. 

4.  Do not fill cooking vessel beyond 

maximum fill-line. 

5.  Never allow oil or grease to get hot-

ter than 400°F or 200°C. If the tem-
perature exceeds 400°F (200°C) or 
if oil begins to smoke, immediately 
turn the burner or gas supply OFF. 

6.  Heated liquids remain at scalding 

temperatures long after the cooking 
process. Never touch cooking appli-
ance until liquids have cooled to 

115

°

F (45°C) or less. 

7.  If a fire should occur, keep away 

from the appliance and immediately 
call your fire department. Do not at-
tempt to extinguish an oil or grease 
fire with water. 

 

 
Failure to follow these instructions could 
result in fire or explosion which could 
cause property damage, personal injury 
or death. 

DANGER

 

Conforms to ANSI Std Z21.89-2013 
Outdoor cooking specialty gas appliance

 

Summary of Contents for VT280SS1

















Reviews: