Smittybilt 97612, Instruction Manual

Page: 16 / 24

16
Wiring for Lighting/DRL and Tie Bar
XRC Gen 3 control box features a light up
XRC logo. It is recommended to use as a
daytime running light or may be independently
switched.
To power XRC logo (Fig 1):
Step 1: Locate blue and white wire coming out of the
control box (Fig 2).
Step 2: Decide on power source. This could be an aux
switch, daytime running light, fog light, or headlight
circuit.
Step 3: Route wire ensuring it will not chafe along any
sharp edges or get caught in any moving parts. Then
connect to positive power source of your choice.
Note: An inline fuse or wiring to a fused circuit is
recommended. XRC logo light draws approximately 50
mAh.
XRC Gen 3 winches feature a lighted front tie bar
to light up the winch and drum during evening
recoveries. LED tie bar is illuminated only when
you have the remote control plugged in to the
control box.
Step 1: Locate the black wire coming out of the control
box and the black wire coming out of the tie rod on
the motor side. Each end of the wire has a small quick
connect plug (Fig 3).
Step 2: Locate the arrow on each of the plugs. With the
arrows facing each other, connect the quick connect
plugs to complete the circuit (Fig 4). DO NOT twist
connectors when making the connection.