TF1D QUICK START
Connect power supply, motor and peripherals (See pages 4 and 5)
BOX L TF1D
SMINN
Power the control panel, the screen will turn on
Test motor operation and adjust limit switches
Enter the menu by pressing
BACK
and
ENTER
simultaneously
1
2
6
3
BACK
ENTER
BACK
ENTER
<MANEUVER MODE >
STANDARD
< MAINTENANCE >
< VERSION >
2BK
Press
Å
until
MAINTENANCE
appears.
Press
ENTER
to enter the
submenu
Press
Æ
until
OPENING
appears.
< OPENING >
Press and hold
ENTER
to
test door opening. When
nished, press
Æ
to move to
CLOSING
.
< CLOSING >
Press and hold
ENTER
to
test door closing. Close the
door completely. Press
BACK
to exit the submenu.
< MAINTENANCE >
< DOOR TYPE >
RISING
DOOR TYPE
< RISING >
DOOR TYPE
< OVERHEAD >
< DOOR TYPE >
OVERHEAD
< DOOR TYPE >
RISING
Select door type
Press
ENTER
to modify the
parameter
Press
Å
or
Æ
to modify the
selected value
4
Press
ENTER
to accept the
modi cation or
BACK
to
maintain the previous value.
Select the maneuver mode (see page 7)
5
< DOOR TYPE >
RISING
Press
Æ
to go to the next
parameter
<MANEUVER MODE >
STANDARD
Press
ENTER
and select the
desired value
<MANEUVER MODE >
OPEN CLOSE
Three-phase 400V wiring
230VAC
400VAC
400VAC
400VAC
Three-phase Motor
Three-phase power
Neutral
400VAC in Star
Perform the maneuver programming procedure. Make sure you have closed the
door rst.
7
< MAINTENANCE >
Press
Å
until
MAINTENANCE
appears.
< PROG WIZARD >
Press
ENTER
to enter the
submenu
BEAM 1
< NO >
Press
Å
or
Æ
to modify the
parameter and
ENTER
to
con rm and move to the
next parameter.
You can check the
parameters on pages 11-12
PRESS ENTER TO
LEARN OPEN
Press
ENTER
,
LL1
or a
transmitter
to start.
Test operation and tune
OPTIONS
and
SETTINGS
8
Use
LL1
,
LL2
or a
transmitter
to test the operation of the maneuver. If necessary, modify the
corresponding parameters in
OPTIONS
and
SETTINGS.
ENT->STOP
Wait for the door to reach
the end
PRESS ENTER TO
LEARN CLOSE
Press
ENTER
,
LL1
or a
transmitter
to start.
ENT->STOP
Wait for the door to reach
the end
< PROG WIZARD >
Programming is complete.
Press
BACK
to exit the
menu and save the
con guration.
innovative in electronics
C:1.89 M:2.37
C:1.92 M:2.33
Do not enter
OPTIONS
and
SETTINGS
menus, not necessary for programming