Smeg SUK91CMX9 Manual Download Page 4

Instructions

6

1.3 Appliance purpose

•  This appliance is intended for cooking 

food in the home environment. Every 
other use is considered improper.

•  This appliance may be used by children 

aged at least 8 and by persons of 
reduced physical, sensory or mental 
capacity, or lacking in experience in the 
use of electrical appliances, provided 
that they are supervised or instructed by 
adults who are responsible for their 
safety.

•  The appliance is not designed to 

operate with external timers or with 
remote-control systems.

1.4 Disposal

This appliance must be disposed of 
separately from other waste 
(Directives 2002/95/EC, 2002/

96/EC, 2003/108/EC). The appliance 
does not contain substances in quantities 
sufficient to be considered hazardous to 
health and the environment, in accordance 
with current European directives.
To dispose of the appliance:
•  Cut the power supply cable and remove 

it along with the plug.

•  Deliver the appliance to the appropriate 

recycling centre for electrical and 
electronic equipment waste, or return it to 
the retailer when purchasing an 
equivalent product, on a one for one 
basis.

Our appliances are packed in non-
polluting and recyclable materials.
•  Deliver the packing materials to the 

appropriate recycling centre.

1.5 Identification plate

The identification plate bears the technical 
data, serial number and brand name of the 
appliance. Do not remove the identification 
plate for any reason.

1.6 This user manual

This user manual is an integral part of the 
appliance and must therefore be kept in its 
entirety and within the user’s reach for the 
whole working life of the appliance.
Read this user manual carefully before using 
the appliance.

Power voltage

Danger of electrocution

•  Disconnect the mains supply.
•  Unplug the appliance.

Plastic packaging

Danger of suffocation

•  Do not leave the packaging or any part 

of it unattended.

•  Do not let children play with the 

packaging plastic bags.

Summary of Contents for SUK91CMX9





































Reviews: