Cleaning and maintenance
29
EN
4.2 Cleaning the doors
The door glazing should always be kept
thoroughly clean. Use absorbent kitchen
roll. In case of stubborn dirt, wash with a
damp sponge and an ordinary detergent.
Removing the door
For easier cleaning, the door can be
removed and placed on a canvas.
To remove the door proceed as follows:
1. Open the door completely and insert two
pins into the holes on the hinges
indicated in the figure.
2. Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
To reassemble the door, put the hinges in
the relevant slots on the front of the oven,
making sure that the grooved sections
A
are
resting completely in the slots. Lower the
door and once it is in place remove the pins
from the holes in the hinges.
Cleaning the door glazing
1. Remove the internal glass pane by
pulling the rear part gently upwards,
following the movement indicated by the
arrows (
1
).
2. Then, pull the front part upwards (
2
). In
this way, the 4 pins attached to the glass
detach from their housings in the oven
door.
Summary of Contents for SUK62MX8
Page 44: ...914778752 C ...
