Smeg SUK62MX8 Page 43 Manual Download

Page: 43 / 44

Installation

5.5 Instructions for the installer

• The plug must be accessible after

installation. Do not bend or trap the
power cable.

• The appliance must be installed

according to the installation diagrams.

• Do not try to unscrew or force the

threaded elbow of the fitting. You may
damage this part of the appliance, which
may void the manufacturer’s warranty.

• Use soap and water to check for gas

leaks on all connections. DO NOT use
naked flames when looking for leaks.

• Turn on all the burners separately and at

then all together to make sure that the
gas valve, burner and ignition are
working properly.

• Turn the burner knobs to the minimum

position and check that the flame is
stable for each individual burner and all
the burners together.

• If the appliance does not work correctly

after having carried out all the checks,
contact your local Authorised Service
Centre.

• Once the appliance has been installed,

please explain to the user how to use it
correctly.

Summary of Contents for SUK62MX8













































Search results

Summary of Contents for SUK62MX8

Reviews:

Related manuals for SUK62MX8

Brands by name

Popular brands

Smeg SUK62MX8, Manual

Search results

Summary of Contents for SUK62MX8

Reviews:

Related manuals for SUK62MX8

Brands by name

Popular brands