background image

USE  -  21

91477A548/A

e

Mini guide to accessories

Discover the recipes

To consult the recipes developed for various 
categories of food and to get more information 
on cooking suggestions, we recommend visiting 
the dedicated page on the www.smeg.com 
website, which can be reached using the QR 
code on the leaflet supplied with the product.

Information for Supervisory Bodies

Fan forced mode

The ECO function used to establish the energy 
efficiency class is compliant with the 
specifications of European standard EN 
60350-1.

See the “To save energy 

” section in the 

INSTRUCTIONS chapter.

Conventional heating mode

To use the STATIC mode, you have to skip the 
preheating stage (see the section “Preheating 
stage” in the USE chapter.

See the “To save energy 

” section in the 

INSTRUCTIONS chapter.

Special functions

• On the display, press the 

 button.

The appliance suggests the defrosting function 

.

DEFROSTING

1. After entering the special functions menu, 

press the 

 and 

 touch buttons on 

Rack

We recommend the use of the grill as a support surface for baking moulds/casseroles.
In the absence of the baking tray grill, the grill can be used as a base for grilling with the deep 
baking tray placed on a shelf below to collect the juices.
For multilevel baking, place two grills leaving one free shelf between them and use the FAN-

HEATED 

 

or FAN-HEATED BASE 

 function.

Tray

Use the baking tray for pastry preparations, for low thickness baking and for cooking without 
the addition of liquids.

We recommend using the STATIC function 

 

 on the desired shelf.

Deep tray

We recommend the use of the deep baking tray for cooking on one level only.
Place the deep baking tray on the centre shelf when using the fan-assisted functions. When 

using the STATIC function, 

 

 place the deep baking tray on the required shelf.

Place the baking tray on the last shelf with the baking tray grill to cook in GRILL mode 

.

Tray rack

We recommend using the baking tray grill as a base to collect the juices from the grills.

To scroll through the available functions, 

press the 

 and 

 touch buttons 

until the desired special function is 
selected.

To exit the selected function (not yet 

started), press and hold the 

 button 

on the control panel or the 

 button 

on the display.

This function allows you to defrost food 
on the basis of a selectable time.

Summary of Contents for SOPA6102TS






































Reviews: