Smeg SI2631D Manual Download Page 9

28  -  USE

91477A308/A

Using the hob

Switching on the cooking zones

After switching on the display:
1. Select the cooking zone to be activated 

using the appropriate selection buttons (e.g.: 

 front right cooking zone).

2. Use the 

 and 

 buttons to select 

power levels from 1 to 9 or enable the 
Booster function.

Switching off the cooking zones

1. Select the cooking zone to deactivate.
2. Use the 

 button to reset the power level 

to 0 (zero).

If a vessel not suitable for induction cooking is 
used on an active zone or there is no vessel, the 
zone will not deliver power and its display will 
show the 

 symbol alternating with the power 

level number.

Power level table

The power in the cooking zones can be 
adjusted to various levels. In the table below 
you will find instructions for the different types of 
cooking.

Booster function

The Booster function allows you to heat a pan at 
maximum power for a limited amount of time. It 
can be used to bring a large amount of water to 
the boil rapidly.
After selecting a zone:
1. Set the power level to 9.

2. Press the 

 button again; the 

 symbol 

will be shown on the display.

To deactivate the Booster function, simply 
decrease the power level of the cooking zone 
or switch off the appliance.

Additional functions

Timed cooking

This function is used to program the automatic 
switch-off of each cooking zone at the end of a 
period of time set by the user (from 1 to 99 
minutes).
To set a timed cooking:
1. Select any cooking zone using the specific 

buttons.

2. Select a power level (from 1 to 9).

3. Press the select cooking zone button again; 

a beep will be emitted to confirm.

The 

 symbol will appear on the display of 

the selected zone, while 

 will appear on 

the displays of the adjacent zones.

4. Use the 

 and 

 buttons to select the 

minutes (pressing continuously allows you to 
advance quickly).

5. Press any select cooking zone button or wait 

10 seconds to start the timer.

•   Hold the 

 button down for at 

least 2 seconds to switch off all 
cooking zones at the same time.

•   A zone can be switched off quickly 

by pressing the 

 and 

 buttons 

at the same time.

Power level

Suitable for:

0

OFF setting

from 1 to 2

Cooking small amounts of food 

(minimum power)

from 3 to 4

Cooking

from 5 to 6

Cooking large quantities of food, 

roasting larger portions

from 7 to 8

Roasting, slow frying with flour

9

Roasting

P

Bring a large amount of water to 

the boil (maximum power, see 

"Booster function")

See General safety instructions.

The Booster function remains active for 
a maximum of 10 minutes, after which 
the power level of the zone returns to 9.

The timer cannot be activated if the 
power level of the selected zone is zero 
(0).

If one of the front zones has been 
selected, the digits of the countdown 
will appear on the displays of the rear 
zones and vice versa.

Summary of Contents for SI2631D

















Reviews: